Submit a request
Non-silicone mineral oil defoamer
PC-310 is a highly effective non-ionic defoamer based on mineral oils and polyglycol ethers. The product is specifically designed for water-based systems that require high surface cleanliness and the absence of silicone contaminants.
Thanks to a balanced combination of hydrophobic components, PC-310 provides rapid foam suppression and a long-lasting antifoaming effect. It is silicone-free, eliminating the risk of coating defects (such as craters, fisheyes, or interlayer adhesion failure) in paints and varnishes.
Safe for silicone-sensitive coatings.
Does not leave films or oily residue on the surface.
Works both during production and application.
Suitable for a wide range of aqueous systems (pH 5-9).
| PARAMETERS | VALUES |
| Appearance | Cloudy liquid from white to light yellow |
| Chemical basis | Mineral oil, polyether polyols, surfactants |
| Silicone content | 0% (absent) |
| Viscosity (at 25 °C) | 100-500 mPa*s |
| Mass fraction of non-volatile matter | 100 % |
| Density (at 20 °C) | ~ 0,87-0,93 г/см3
~ 0.87-0.93 g/cm3 |
| Solubility in water | Dispersible (not soluble) |
| pH (1% aqueous emulsion) | 5,0-8,0 |
| Flash point | >150°С |
Scope:
Paints and varnishes: Water-based paints (interior and exterior), latex paints, primers.
Adhesives: PVA adhesives, acrylic adhesives, butadiene-styrene latex.
Printing: Water-based flexographic and deep-ink inks.
Textiles: Impregnations, finishing agents, dye baths.
Petrochemicals: Water-based drilling fluids.